ITCC > Products > American Standard > Intermediate Metallic Conduit

INTERMEDIATE METALLIC CONDUIT

IMC Conduits are produced as a cross between EMT and RMC Conduits.
Weighs 1/3” less than a typical RMC Conduit but has a larger inside diameter allowing for easier wire pulling.

The interior and exterior surfaces are protected by zinc and organic coatings using the hot-dip galvanizing process.

ITCC IMC Conduits are manufactured in accordance with ANSI C80.6 and UL 1242

IMC2

Sizes: Nominal trade sizes are from ½” to 4”
Length: IMC Conduit is manufactured in traditional standard length, 3.05 Meters (10 Ft). It is threaded at both ends with coupling applied at one end and plastic cap to the other.

INTERMEDIATE METAL CONDUIT - STEEL (WEIGHTS AND DIMENSIONS)

Code Trade SIze Metric Designator Wall Thickness Outside Diameter Indisde Diameter Length of Straight Conduit ± 6 Min. Weight of Ten Pieces Screwed & Coupled
mm. mm. mm. mm. Kg.
C-I00050 ½" 16 1.97 20.70 16.76 3005 28.12
C-I00075 ¾" 21 2.10 26.13 22.07 3005 38.13
C-I00100 1" 27 2.35 32.77 28.07 3005 53.98
C-I00125 1¼" 35 2.42 41.59 36.77 3005 71.67
C-I00150 1½" 41 2.54 47.82 42.74 3005 88.00
C-I00200 2" 53 2.67 59.93 54.60 3005 116.22
C-I00250 2½" 63 3.81 72.57 64.95 3005 200.24
C-R00300 3" 78 3.81 88.29 80.67 3005 246.50
C-I00350 3½" 91 3.81 100.86 93.24 3005 285.60
C-I00400 4" 103 3.81 113.44 105.82 3005 317.82

Need a quick quote ?

REQUEST A QUOTE

    REQUEST A QUOTE

    WHAT'S YOUR REQUIREMENT ?

    If You Need Any Industrial Solution ... We Are Available For You

    Contact Us